HIKMICRO Thunder 2.0 TE19C Smart Thermal Clip-On w/ Free Scope Adaptor (40A, 50A, 56A, or 62A) - 2.5x 19mm 35mK 256x192px 12µm
- 12µm pixel interval
- F1.0 aperture
- Focus knob design
- Magnesium alloy design
- M52*0.75 thread (only for clip-on version)
- Brand new UI quick menu activated
- Brightness and tone adjustable
- Recoil-activation and audio recording
- Automatic calibration countdown
- Up to 10h operating time
- Extra charging method
- Excellent performance under low-temperature
- Replaceable and rechargeable high capacity power pack.
PLEASE STATE THE ADAPTER CLAMP SIZE YOU REQUIRE FOR THE FRONT OBJECTIVE IN ORDER NOTES.
The all new Thunder 2.0 from HIKMICRO builds on the success of the original Thunder with an updated, ergonomic design and price point that makes thermal riflescopes affordable to a much wider group of shooters.
The Thunder 2.0 chassis has been completely redesigned from the ground up and incorporates many new features including the removable HIKMICRO Li-ion battery pack which delivers more than 10 hours of runtime and can be conveniently recharged away from the gun.
Fitted with HIKMICRO’s 256px, SUB 35mK NETD sensor the Thunder 2.0 is able to detect small temperature differences, allowing it to build a detailed image of your surroundings showing you any nearby heat sources and their surroundings. Optimised for air rifle and rimfire shooters the Thunder 2.0 provides and affordable entry level into hunting with thermal without having to compromise on the quality.
The Thunder 2.0 is loaded with HIKMICRO’s powerful software to boost your hunting experience - including one shot zero, picture in picture, recoil activated recording and access to the HIKMICRO Sight app which allow you to stream and control your scope from your phone.
Thunder 2.0 Clip-On Scope Clamp Sizes:
- HM-ADAPTER-40A = Thunder 2.0 Clip-on scope adaptor to fit 40mm diameter scope
- HM-ADAPTER-50A = Thunder 2.0 Clip-on scope adaptor to fit 50mm diameter scope
- HM-ADAPTER-56A = Thunder 2.0 Clip-on scope adaptor to fit 56mm diameter scope
- HM-ADAPTER-62A = Thunder 2.0 Clip-on scope adaptor to fit 62mm diameter scope
- IMAGE SENSOR Uncooled Focal Plane Arrays
- MAX. RESOLUTION 256 × 192
- FRAME RATE 50 Hz
- PIXEL INTERVAL 12 μm
- NETD less than 35 mK (25°C, F# = 1.0)
- LENS (FOCAL LENGTH) 25 mm
- FOCUS KNOB No
- DETECTION RANGE 1200 m
- MIN. FOCUSING DISTANCE 0.5 m
- APERTURE F1.0
- MAGNIFICATION 3.25 ×
- FIELD OF VIEW (H × V),
- DEGREES/M @100 M 7.03° × 5.28°/12.29 m × 9.22 m
- IMAGE DISPLAY
- DISPLAY 1024 × 768, 0.39 inch, OLED
- PALETTES Black hot, white hot, red hot, fusion
- FFC (FLAT FIELD CORRECTION)
- MODE Auto, Manual, External Correction
- EXIT PUPIL 6 mm
- EYE RELIEF 45 mm
- DIOPTER (RANGE) -5 D to 5 D
- BRIGHTNESS ADJUSTMENT Yes
- TONE ADJUSTMENT Cold, Warm
- SYSTEM
- RECORD VIDEO On-board video recording
- CAPTURE SNAPSHOT Yes
- DIGITAL ZOOM 1x, 2x, 4x, 8x
- STANDBY MODE Yes
- STORAGE Built-in EMMC (16 GB)
- PIP Yes
- DPC Yes
- HOTSPOT Yes
- HOT TRACK Yes
- DISTANCE MEASUREMENT Yes
- RECOIL-ACTIVATION
- RECORDING Yes
- AUDIO RECORDING Yes
- MAX. RECOIL 1000 g/0.4 ms
- POWER SUPPLY
- BATTERY TYPE Replaceable and Rechargeable Li-ion Battery
- BATTERY OPERATING TIME ≥ 10 h (25°C, with hotspot off)
- TYPE-C POWER SUPPLY 5 VDC, 2 A
- Supports external power supply
- GENERAL
- PROTECTION LEVEL IP67
- DIMENSION 218.7 mm × 67.14 mm × 68.04 mm
- WEIGHT 494 g without battery
- WORKING TEMPERATURE -30°C to +55°C (-22°F to 131°F)
- HM
Extremely High Thermal Sensitivity:
- 12µm pixel interval
- F1.0 aperture
Advanced Appearance Design:
- Focus knob design
- Magnesium alloy design
- M52*0.75 thread (only for clip-on version)
Software Revolution:
- Brand new UI quick menu activated
- Brightness and tone adjustable
- Recoil-activation and audio recording
- Automatic calibration countdown
Powerful Battery Pack:
- Up to 10h operating time
- Extra charging method
- Excellent performance under low-temperature
- Replaceable and rechargeable high capacity power pack.
- Main Unit: 3 years
HIKMICRO has a full UK service and technical centre, complete with Hotline: 0203 514 0092 available to assist with any issues.